setstats
 
Search:
Sort By Date
 
 

ZXLD1320

Diodes Inc.


Product Web Page
Report Broken Link

Product Description:
The ZXLD1320 is an inductive DC-DC converter, with an internal switch, designed for driving single or multiple LEDs in series up to a total of 1.5A output current. Applications cover both commercial and automotive environments with input voltages ranging from 4V to 18V. Depending upon supply voltage and external components, this can provide up to 24W of output power. The device employs a variable 'on' and 'off' time control scheme with adjustable peak switch current limiting and operates in the step-down (Buck) operating mode, offering higher power efficiency and lower system cost than conventional PFM circuitry. The device includes the DC-DC converter, a high-side current monitor and an NPN switching transistor to provide an integrated solution offering small PCB size, competitive cost/performance, high power efficiency of DC-DC conversion and maximum LED brightness/reliability. More importantly, it retains design flexibility to add customer specific features. The feedback control circuitry inside the ZXLD1320 provides excellent load and current regulation, resulting in very stable LED current over the full operating voltage and temperature range. The LED current can be adjusted from 100% down to 10% of the set value by applying a dc voltage to the ADJ pin and down to 1% by applying a PWM signal. An on-chip LED protection circuit also allows output current to be reduced linearly above a predetermined threshold temperature using an external thermistor at the TADJ pin. External resistors set nominal average LED current and coil peak current independently. The 'Power-OK' (POK) output flag remains high during normal operation, but switches low if the switch transistor remains on for more than 500μs. This provides indication of a low battery, or fault condition. The POK output may be used to drive an LED or the input of an MCU. The device can be shut down by applying a continuous low level dc voltage to the ADJ pin.


Product Specifications:
Features
Step-down LED driver
4V to 18V input voltage range
Up to 1.5A output current
Typical efficiency# > 85%
User-defined thermal control of LED output current using external thermistor
High output current stability over input voltage and temperature
12μA typical standby current
LED current adjustable from 100% down to 2%
Adjustable soft-start
Power 'OK' flag output
Capable of driving 4 LEDs in series

Product Overview Specs
Part Number ZXLD1320
Min.- Max. Input Voltage (V) 4 ~ 18
Output Voltage (V) 18
Typ Peak Output Current (A) -
Max Output Current (mA) 1.5
LED Current Accuracy (%) 5
Frequency (kHz) typ 600
Efficiency (%) 85
Operating Temperature (C) -40 to +125
Quiescent Current (mA) typ 1.5
Standby Quiescent Current (uA) typ 12



Post Your Comment