setstats
 
Search:
Sort By Date
 
 

AP8800

Diodes Inc.


Product Web Page
Report Broken Link

Product Description:
The AP8800 is a step-down DC/DC converter designed to drive LEDs with a constant current. The device can drive up to seven LEDs, depending on the forward voltage of the LEDs, in series from a voltage source of 8V to 28V. Series connection of the LEDs provides identical LED currents resulting in uniform brightness and eliminates the need for ballast resistors. The AP8800 switches at frequency up to 0.6MHz. This allows the use of small size external components, hence minimizing the PCB area needed. Maximum output current of AP8800 is set via an external resistor connected between the VIN and SET input pins. Dimming is achieved by applying either a DC voltage or a PWM signal at the CTRL input pin. An input voltage of 0.2V or lower at CTRL shuts down the output at SW and puts the device into a low-current standby state.


Product Specifications:
LED driving current up to 350mA
• Compatible with 12V & 24V standard systems
• High efficiency up to 92%
• High switching frequency up to 0.6MHz
• PWM/DC input for dimming control
• Built-in soft-start function
• Built-in output open-circuit protection
• SOP-8L, MSOP-8L and DFN3030-10 are available in “Green” Molding
Compound (No Br, Sb)
• Lead Free Finish/RoHS Compliant (Note 1)

Part Number AP8800
Min.- Max. Input Voltage (V) 8 ~ 28
Output Voltage (V) 28
Typ Peak Output Current (A) 0.35
Max Output Current (mA) -
LED Current Accuracy (%) 7
Frequency (kHz) typ 600
Efficiency (%) 92
Operating Temperature (C) -40 to +85
Quiescent Current (mA) typ -
Standby Quiescent Current (uA) typ 30



Post Your Comment